Loading... Please wait...

Stencil Stuff MSDS

Stencil Stuff MSDS

MSDS/Material Safety Data Sheet

Stencil Stuff

 

 

Revision Date: 3/10/08

click here to download the PDF

1. PRODUCT AND COMPANY IDENTIFICATION

 

Trade name: STENCIL STUFF

Trade code: TM #06-D (Product classification 3304.99.50.00 /Mfg. In U.S.A.)

Product type and use:Body/Skin Lotion for transferring tattoo stencils

Licensed Production Facility:Farpoint, Inc. 123 N. Orchard Street #4A, Ormand Beach, FL 32174 U.S.A.

 

Seller: National Industries, Inc./Stencil Stuff Products Div. 1036 E. Hernandez Ave., Las Vegas, NV 89123-2155 U.S.A. (702) 463-1943

 

Emergency telephone number of the company and/or of an authorized advisory center: CAC phone: 682-365-1574

 

 

2. COMPOSITION/INFORMATION AND INGREDIENTS

Proprietary formulation.

Water, aloe barbadensis leaf juice, propylene glycol, sodium stearate, steareth-20, polysorbate-20, carbomer, triethanolamine, polyquaternium-55, quaternium-15

 

3. HAZARDS IDENTIFICATION

 

No known.

 

4. FIRST AID MEASURES

 

Contact with skin: Prolonged contact may cause irritation in some people. When contact is evident, flush area with water.

Contact with eyes: Can cause irritation on contact. Flush with large amounts of water. Seek prompt medical attention if irritation persists.

Swallowing: LD 50 greater than 16g/kg body weight. Excessive amounts can cause diarrhea.

Inhalation: Prolonged exposure to material may cause irritation of nasal passages. Avoid breathing hot vapors. Use respirator if necessary. In case of overexposure, move to fresh air

 

5. FIRE FIGHTING MEASURES

 

Non-flammable.

 

6. ACCIDENTAL RELEASE MEASURES

 

Measures for personal safety:

Gloves and safety goggles should be worn when handling product. Environmental measures:

Limit leakages with earth or sand. Eliminate all unguarded flames and possible sources of ignition. Do not smoke. If the product has escaped into a water course, into the drainage system, or has contaminated the ground or vegetation, notify the competent authorities.

Cleaning methods: If the product is in a liquid form, stop it from entering the drainage system. Recover the product for re-use if possible, or for elimination. The product might, where appropriate, be absorbed by inert material. After the product has been recovered, rinse the area and materials involved with water.

 

7. HANDLING AND STORAGE

 

Handling precautions:

Avoid excessive inhalation. Incompatible materials:

None in particular. Storage conditions:

Store in cool, dry area protected from light. Keep container closed when not in use. Instructions as regards storage premises: Cool and adequately ventilated.

 

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

 

Precautionary measures:

Not needed for normal use.Respiratory protection: Not needed for normal use.

Protection for hands: Not needed for normal use.

Eye protection: Not needed for normal use.

Protection for skin: No special precaution must be adopted for normal use.

Exposure limit(s) (ACGIH): None established.

 

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance and colour: semi-turbid lotion

Odour: none

pH: 4.0 - 7.0 N/A

Flash point: none

Relative density:1.005 to 1.01

Solubility in water: Complete

 

 

10. STABILITY AND REACTIVITY

 

Conditions to avoid: Stable under normal conditions.

Substances to avoid:

Hazardous decomposition products: None.

 

11. TOXIOLOGICAL INFORMATION

 

Non-toxic.

 

12. ECOLOGICAL INFORMATION

 

Adopt good working practices, so that the product is not released into the environment.

 

13. DISPOSAL CONSIDERATION

 

Recover if possible. In so doing, comply with the local and national regulations currently in force.

 

14. TRANSPORTATION INFORMATION

 

Road (ADR): Not classified hazardous.

Rail (RID): Not classified hazardous.

Air (ICAO/IATA): Not classified hazardous .

Sea (IMO): Not classified hazardous.

UN number: None

 

15. REGULATORY INFORMATION

 

(Classification and Labelling): Not classified under 99/45/EC

R Phrases: Not classified under 99/45/EC

 

16. Other Information For Industrial Use

 

The information contained herein is based on our state of knowledge at the above-specified date. It refers solely to the product indicated and constitutes no guarantee of particular quality. It is the duty of the user to ensure that this information is appropriate and complete with respect to the specific use intended. This MSDS cancels and replaces any preceding release.